Mariner 3S Proliner navi3 with high-tech sensorThe intelligent Proliner navi3 cleans each pool lane by lane. It is suitable for pools with an area of at least 300 m2 and more.
AutomaticThe Proliner navi3 is equipped with a high-tech sensor. This allows fully automatic and systematic lane by lane cleaning for any pool. The device detects obstacles such as e.g. water mushrooms and bypasses them safely, so that the transported cable is not coiled. After work, the device switches off automatically. It cleans, for example, a pool of 12,5 x 50 m in less than 2.5 hours.
Fully automatic and systematic lane by lane cleaning
Cleaning performanceThe vacuum up to 20 kg generated by the hydraulic system, the construction of the device and the scrubbing action of the brushes ensure a cleansing leaving clear traces - in all pools with a water depth of 20 cm and more. In addition, the unit is equipped on both sides with side brushes, which remove the dirt from side edges and corners.
HydraulicA sophisticated hydraulic system guarantees effective cleaning performance across the entire width of the appliance. The dirty water runs through the filter and then through the pump. This way, the pump is protected against blockage and damage.
Filter capacity6 lamella filter cartridges are designed as a filter area up to 6 m2. Only with a large filter surface is it possible to filter out large dirt quantities. The filter cartridges are located in a filter box. This practical container can be removed from the top of the unit and carried to the cleaning area without loss of dirt.
HandlingEquipped with a trolley and a cable drum, the Proliner navi3 is easily manoeuvrable on ground and neatly stowable, if not in use. The robot can be driven in the pool with operating drives. Using the integrated function of re-emergence, it moves itself from the pool ground back on the water surface, where it can be simply driven out of the pool by using the drives.
Scope of delivery
- Cleaning device with integrated filter box and filter set
- Transport trolley with cable drum
- Remote control with features such as operating hours and cycle counter, menu choice, parameter settings
- Radio remote control
- Commissioning and staff training on site
Weight and dimensions of robot
Weight transport trolley with cable
|830 x 610 x 520 mm|
100-240 V AC
|5 A/10 A|
|Nominal output||0,5 kW|
28 V DC
|Protection type||IP 68|
|Cleaning width||up to 700 mm|
|Minimum water depth||20 cm|
|Maximum water depth||10 m (8-10 m with reservations)|
|Pump capacity||850 l/min|
|Climbing ability||Inclinations up to 28°|
|Filter media||6 lamella filter cartridges 50/100/130 my|
|Power cable length||10/20 m|
|Length floating cable||40/50 m|
|Travelling speed||7.5-18 m/min|
|Minimum water temperature||10 °C|
|Maximum water temperature||40 °C|
|Water quality||Freshwater, sea, thermal, brine water; baths with conventional or biological water treatment|
Automatic drive patterns
H, N, X-program more
Setting of the start time for automatic mode
Immediate start or start delay
|Switch-over in automatic mode|
|Manual operation||With radio remote control forward, backward, turning left, turning right, turning on the spot, 3 speeds|